Fully - Automatic
T-Lace Tipping Machine
AM 74 -T-Lace
The fully automatic T-Lace tipping machine AM 74-T-Lace
is similar to our fully-automatic Shoe-lace Tipping Machine AM 74,
but includes the complete equipment to manufacture T-Laces.
The machine pulls fully-automatically the lace from a spool or out of a barrel,
measures the lace to the adjusted length at the touch panel,
fixes the ends by our tipping systems and cuts.
The next production process is started fully-automatically.

Guaramtee:          2 years

length of laces:    10 cm to 160 cm (AM 74)
                    (loger on request)

Cross Weight:       750 KG 
Country of Origin:  Germany

Tipping:            exchangeable die - boxes

With the Touch Panel and the SERRVO - Motor you
will be able to adjust the lenght to 1 mm.

 Foto AM 74
The
fully-automatic T - Lace Tipping Machine AM 74 - T - Lace

produces T - Laces for paper-hand-bags.

The T - Lace
 is manufactured with the use of     T - Tape

The mechanic T -Tape Transport
Our machine works with a mechanic T-Tape transport instead of a sensor with servo-motor.
By this way we are able to bring the T-Tape always into the right position to be cut, and this also at high
quantities and high production speed. This is a very big advantage of our machine.		 T-Schnüre
T - Tape:
The production of T-Laces is done with the use of our T-Tape.
The pre-punched acetate - tape is used in connection with acetone, heat and
high preassureFully - Automatic
Shoe-Lace Tipping Machine AM 74

Pieces pes hour:
The machine produces max. 1.200 pieces per hour.
The real number of pieces depends to the length of the
laces.

Two Years of Garantee:
The machine has a garantee of two years which points out the very high quality of this machine.
All over the world shoe-lace manufacturer work with this machine. 

Lenght of Laces
The machine AM 74 is able to manufacture laces from 10 cm up to 160 cm length.

 t-Folio
Exchangeable Die - Boxes:
The tipping of shoe-laces is done by dies, which wrap the foil arround the lace, press together both (lace and tape) under high pressure and cut. According to the thickness of the lace, different sizes of dies are
needed. The exchange of dies in the die-box, which is always necessary if you change form thinn laces to thick laces, will need approximate one hour. 

On our machine AM 74 the complete die-box can 
be exchanged within 5 minutes.
You take off the die-box with the thinn die and replace the die-box with the thick die:
this will take five minutes max.
This is not only a big win of time, which always means less costs. It is always a big advantage to protect the dies. Each exchange of dies must be done very carefully so that the dies will not damaged.

Protection and CE-Sign:
Securityswitches: The machine is nearly complete protected against exidents and pocesses the CE-sign for security. A lot of security switches improve the safety of the machine.

AM74-Kopf

Touch - Panel:
The machine is commanded over a Siemens touch panel by a Siemens S7.
All movements can be managed over this touch panel like:
length of laces, quantity of pieces, speed of production and much more.

The main menue is divided by:
Set Up:                     Here all movements of motors, cylinders and claws can be commanded seperately.
Automatic running:  Beside "Start" and "Stop" the parameters of the production are to be fixed here:
                                  length of laces, quantity of pieces, speed of production and much more.

 AM74-Touch

Next page:
Semi-automatic Shoe-Lace Tipping Machine 		 AM 71 - T - Lace