tipping with acetate-tape, 
tipping with metal - tape, 
with and without holes for fixing or

melting and fixing synthetic laces only by heat

Exchangeable Die - Boxes:

On the machine AM 71 all kinds of shoe-laces could be manufactured: 
round and flat ones, made of cotton and synthetics 

Two Years Garantee:
The machine has a garantee of two years which points out the very high  quality of this machine.
All over the world shoe-lace manufacturer work with this machine. 

But there is a big difference:
Normaly semi-automatic machines work with a system, which is a unit of  three pieces: 
The die with forming and cutting part and a knife. This tipping - system has a big  disadvantage: 
The tape is wrapped around the lace while the die closes. 
But the fixed knife begins to cut from the first moment, much before the die  is realy closed.
This means that the lace is cut before the highest pressure to fix the tape at the lace is done.
Our system on the machine AM 71 works different, it works exactly like 
the fully-automatic machines work:
The die is a unit of four pieces. First the tape is cutted and wrapped arround the lace.
Then the two forming and the two cutting pieces of the die close up to  the highest point. Now there is the 
maximum preassure on tape and lace to be fixed. 
Only now and not earlier, the left pair of dies moves further forward and cuts lace and tape while holding 
the left and the right tipp still on highest preassure.

This kind of tipping is standard for all fully-automatic machines. 
But only our semi-automatic machine AM 71 works with the same system.

On our machine AM 71 the complete die-box can be echanged within 5 minutes.
You take off the die-box with the thinn die and replace the die-box with the thick die: this will take five minutes max.
This is not only a big win of time, which always means less costs. It is always a big advantage to protect the dies. Each exchange of dies must be done very carefully so that the dies will not damaged.